Most edge-box projects fail on integration detail rather than on compute. A box needs a fanless thermal path, a wide-range DC input, isolated fieldbus ports, a mechanical design that survives vibration, and a software image that can be restored in the field. TOPEET ships both bare boards and finished boxes so that the same module can be evaluated on a desk and then boxed for a pilot.
What the box requires
- Thermal. Fanless means the SoC case temperature drives the whole enclosure design; the module has to be mounted on a heat-spreader, not on standoffs in still air.
- Power. 12 to 24 V DC nominal with load-dump and reverse-polarity protection; ignition or UPS signalling for vehicle and cabinet installations.
- Fieldbus. Isolated RS-485 and CAN, plus Ethernet for the plant network; a second Ethernet port for camera or device subnets.
- Recovery. A/B partitions or a recovery image on removable storage, so a field engineer can restore a unit without a laptop.
Recommended configuration
| Function | Recommended TOPEET part |
|---|---|
| Multi-channel video and AI inference box | AI Edge Computing Box / Multi-channel Video Gateway (RK3588, 6 TOPS, up to 32 video streams) |
| Cellular edge box for remote sites | Lingqian 4G/5G AI Edge Computing Box |
| PLC-adjacent IoT box, protocol conversion | 4G Industrial Edge PLC IoT Box |
| Bare board for your own enclosure | iTOP-RK3576 Single Board Computer or iTOP-RK3568 |
| Module for a custom carrier | iTOP-RK3576 SoM (65 x 50 mm, 320 pins) |
Why RK3576 for a mid-range box: four Cortex-A72 at 2.3 GHz and four Cortex-A53 give a comfortable head for protocol stacks and a browser-based HMI, the 6 TOPS NPU handles quality-inspection models at the line rate, and the carrier exposes two Gigabit Ethernet ports, CAN, RS-485 and M.2 for NVMe or a cellular modem.
Interface checklist
- Two Ethernet ports minimum: one for the plant network, one for a camera or device subnet.
- Isolated RS-485 and CAN on the terminal block, not through a USB adapter.
- Wide-range DC input with an ignition signal for vehicle-mounted units.
- Storage: eMMC for the OS, M.2 NVMe or SATA for the data ring buffer.
- One service port: USB-C or a front-panel USB that can be disabled in software.
What we would validate with you
SoC temperature at the worst-case ambient in your cabinet, 24-hour protocol soak with the real PLC, and the recovery path after a deliberate image corruption.
Documents
Datasheets and manuals for both boards and boxes are in the resource portal; registration required. 12-month warranty, engineering support by email.
Frequently asked questions
Should I buy a finished box or a bare board and enclose it myself?
A finished box where you need a designed fanless thermal path, wide-range DC input with load-dump protection, isolated fieldbus ports and mechanics rated for vibration. A bare board such as the iTOP-RK3576 when you have your own enclosure and thermal design.
Which platform for a multi-channel video and AI box?
An RK3588-based edge box rated at 6 TOPS and up to 32 video streams is the starting point; an RK3576 board covers cost-sensitive boxes with the same 6 TOPS NPU class at lower price.
What gets validated on an edge box?
SoC temperature at the worst-case ambient inside your cabinet, a 24-hour protocol soak against the real PLC, and the recovery path after a deliberately corrupted software image.
0 comments