Where a Panel PC Fits
An industrial panel pc combines the display, touch layer and computer in one sealed unit. That integration is the point: instead of mounting a monitor next to a box PC and managing two power leads, two cable runs and two failure points, you specify one device with a defined front face and a defined environment. Panel PCs make the most sense for operator stations, kiosks, shop-floor terminals and machines where the screen is the interface.
A box PC plus an external display remains the better choice when screens are large, numerous or replaced independently, or when the computer must live away from the operator. Our guide to selecting an industrial PC covers the enclosure, temperature and I/O questions that apply in both cases. For signage-specific installations, see building a multi-display signage player.
Choosing the Display Size
Size is an ergonomic decision before it is an electrical one. A 7-inch panel suits compact machines, portable instruments and stations where the operator stands close. A 10.1-inch panel gives more room for tabular data, multi-field forms and supervisory screens. Anything larger usually moves you into a different mounting and power class.
Do not size from a drawing alone. Consider viewing distance, glove use, whether the panel sits at eye level or on a machine door, and how much of the bezel will be covered by a custom overlay. Check the resolution and brightness of the exact SKU rather than assuming all panels in a family share a spec.
| Size class | Good fit | Practical constraint |
|---|---|---|
| 7-inch | Compact HMI, handheld-adjacent stations, space-limited cabinets | Less room for dense data; check viewing angle |
| 10.1-inch | Operator panels, kiosks, supervisory screens | More cut-out area and mounting depth to plan for |
| Larger formats | Public-facing information and control walls | Different power, mounting and ingress considerations |
Capacitive vs Resistive Touch
Most new designs choose capacitive touch because it feels responsive and supports multi-touch gestures. It is a good match for clean environments and for users who interact with the screen directly. Resistive touch still has a place where operators wear heavy gloves, where a stylus is used, or where the surface must tolerate contact that would confuse a capacitive sensor.
An hmi panel is defined less by the touch technology than by how well it survives the shift: consistent response, no drift after temperature cycling, and a front face that can be cleaned. Ask how the touch controller is calibrated and whether the calibration survives a reboot or an OS update.
Ingress Protection and Sealed Design
IP65 panel pc is a frequent search phrase, but the rating belongs to a specific product and a specific installation — not to the category. A sealed front face protects against dust and low-pressure water jets from the front; it says nothing about the rear of the panel, the cable entries or the connector area. If the panel will be washed down, verify the rating of the complete assembly and how the cabinet is sealed around the cut-out.
- Confirm whether the stated rating applies to the front panel only or to the whole unit.
- Check the operating temperature range of the display, touch layer and computer together; the display often sets the limit.
- Plan cable entry with glands or sealed connectors, and avoid creating a drip path into the enclosure.
- For food, chemical or wash-down areas, ask about cleaning agents and front-surface materials.
These checks overlap with the ingress and cooling guidance in our industrial SBC selection guide, especially where a panel PC replaces a board in a custom enclosure.
Operating System, Connectivity and Lifecycle
An android panel pc is often requested when a team wants a familiar touch interface and a short development cycle. Other projects prefer Linux for long-term maintainability or Windows for existing software. Check which OS images are actually validated for the model you are buying, who supplies updates, and how long those updates are committed. An OS that cannot be patched is a liability in a connected installation.
Connectivity is the next constraint. Confirm Ethernet, serial and USB availability, and decide whether cellular or positioning is required. Some families offer variants with 4G or GPS; others do not, and adding a module later may change the enclosure and certification. If you need a board-level approach instead, start from a single board computer and build the panel around it.
Product Picks
- 10.1-inch Capacitive HMI Panel — a larger-format operator screen; confirm the OS and ingress details for the variant you need.
- 7-inch Capacitive HMI Panel — a compact option for space-limited machine interfaces.
- 7-inch Capacitive HMI Panel without 4G — suited to installations with wired connectivity.
Frequently Asked Questions
Is every industrial panel pc rated IP65?
No. Ratings differ by model and often apply only to the front face. Verify the exact datasheet and the sealing of the cabinet cut-out before specifying a wash-down environment.
Can I get an android panel pc with a long support life?
That depends on the vendor's BSP and update policy rather than the operating system name. Ask for the supported OS versions, update cadence and end-of-life commitments in writing.
Should I choose capacitive or resistive touch for gloved operators?
Resistive touch is often more forgiving with heavy gloves or styluses. Capacitive touch feels better for direct interaction. Test with the actual gloves used on site before deciding.
When is a 7-inch hmi panel too small?
When the interface needs dense tables, several simultaneous controls or a viewing distance beyond a couple of metres. Move to a larger panel rather than shrinking text to compensate.
0 comments